Click To Call(656) 269-5576Click To Get A Free Estimate
Gloved hand scrubbing a brick paver walkway with a stiff brush, with green growth on one side

Brighter pavers and clean, full joints

Paver Cleaning and Joint Sand in FishHawk, FL

Request a free paver cleaning estimate for your FishHawk home, or call (656) 269-5576 today.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.00 a sq ft to clean, sand and seal
Call Now(656) 269-5576

Who can clean my pavers in FishHawk, and how soon will I hear back?

A local contractor can clean your pavers in FishHawk, FL, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the estimate is free with no obligation. To get started, call (656) 269-5576.

A wash lifts algae, grime and stains off the surface, so your pavers look brighter and feel safer underfoot. New joint sand then fills the gaps, which helps the pavers stay put and leaves weeds less room. A side walk that has gone green starts to look like part of the home again. Point out the worst spots when you ask for a free estimate.

Call (656) 269-5576

Brick paver walkway with a green, weathered side and a cleaner side

What does paver cleaning include?

Paver cleaning has four parts: a treatment on the growth, a careful wash, fresh joint sand and, if you want it, a coat of sealer. It is the first stage of sealing, and it can be done alone. To reach a contractor, call (656) 269-5576.

Treatment

A cleaning solution goes on algae and organic stains before the wash. Unilock names mild detergent and dedicated paver cleaners, and white vinegar for mold.

Wash

The surface is washed in sections with a wide spray, kept away from the joints so the sand stays in.

Joint sand

Sand is swept back into the joints after the pavers dry.

Optional sealing

If you want protection too, a coat goes on after the surface has fully dried. The sealing guide explains what that adds.

How do I know my pavers need cleaning?

Look for dark streaks, green patches in shaded corners, weeds in the joints or sand that keeps washing out. Green growth on a walkway or pool deck matters most, since a slick surface is a fall risk. To have yours looked at, call (656) 269-5576.

Should I stop at cleaning, or seal the pavers too?

Cleaning restores the look, and sealing adds protection on top. Cleaning adds no protection, so algae and stains return on their own schedule. A sealed surface is easier to keep clean, and Family Handyman says the coat needs redoing every three to five years once it wears. Say which one you prefer when you ask for a free estimate.

How often should FishHawk pavers be cleaned?

Family Handyman recommends one cleaning a year, with spring as the preferred season. A paver expert quoted in another of its guides says shaded, wooded areas need a thorough cleaning every year, while sunny areas may only need one every few years. Need help picking a cleaning rhythm? Call (656) 269-5576.

Is a pressure washer the only way to clean pavers?

No. Family Handyman says a pressure washer is faster but not required, and its hand method uses dish soap, a bucket and a stiff-bristled brush. Unilock lists the risks of a washer too: wrong pressure or nozzle settings can crack or erode pavers and blow the sand out of the joints. Ask the contractor what pressure and nozzle they use before you ask for a free estimate.

Either way, the sand has to go back afterward. Unilock says to inspect the joints and sweep in new material if needed. That is why the sand step belongs in every cleaning price. To talk through your surface, call (656) 269-5576.

Common problems

What paver problems are common around FishHawk?

Fading, green growth, lost joint sand, sprinkler rust and failed old sealer all show up around FishHawk. A wash fixes some of these on its own, while others take extra work. To find out which you have, call (656) 269-5576.

1. Fading in full sun

A wash brings back whatever color is left. Sealing afterward is what slows the next round of fading.

2. Green growth in shaded corners

FishHawk Ranch has lakes, ponds and preserves, and shade keeps corners damp. Algae settles there first.

3. Joint sand lost after storms

Summer downpours wash sand out of the joints. New sand goes in as the last step of the wash.

4. Sprinkler rust spots

Irrigation water can leave rust spots near the sprinkler heads. They are treated during the wash, before any sealer.

5. Cloudy or peeling old sealer

A wash does not lift failed sealer. A company that serves the area says it usually has to be stripped first.

Pricing

What does paver cleaning cost in FishHawk?

Companies around Tampa Bay mostly list one price for the whole clean, sand and seal job. A paver company that serves FishHawk puts it at $1.75 to $3.00 per square foot. The number moves with the shape your pavers are in, the sealer and finish you choose, and the repair work and sand needed. Washing and sand on their own are one part of that job, so they cost less than the full range. For a price on your property, ask for a free estimate.

If you plan to seal as well, ask for one combined price and compare it with the table below. To talk through the two options, call (656) 269-5576.

Thinking about protection as well? The sealing guide covers it, the places served list shows coverage, and contractor standards explain how to vet a company.

Paved areaFull job at $1.75Full job at $3.00
300 sq ft$525$900
600 sq ft$1,050$1,800
1,000 sq ft$1,750$3,000

Figures use the $1.75 to $3.00 per square foot that a paver company serving FishHawk lists to clean, sand and seal. Washing and joint sand on their own come in under these numbers. Repairs and old sealer removal come on top of these figures.

Get a Free Estimate

Pool deck of gray pavers under a screened lanai, with the pool just past the cage
Why choose us

Why hire a local contractor for paver cleaning in FishHawk?

A local contractor already works around the shade, sprinklers and summer rain that turn pavers green here. Check the quote against published rates and decide when you are ready. To start, ask for a free estimate.

A contractor who knows this part of Hillsborough County

A local company already deals with the same sun, summer storms and community rules your pavers do. Your first visit starts from local knowledge instead of guesses.

A free look and a free price

The estimate is free. If the price or the plan does not fit, you can say no and walk away.

Real numbers before the first call

This site shows what paver companies publish per square foot around Tampa Bay. A quote that lands far outside that range is worth a question.

You make the call

You decide whether to hire the contractor. Read what to look for in a contractor, ask for the price in writing and take your time.

How do I get a free paver cleaning estimate?

Send the short form or call, and a contractor writes back within 1 business day, usually much sooner.

Call (656) 269-5576

Free, no obligation

Contractor showing a paver sample to a FishHawk homeowner at the front door
Photos

What does a cleaned FishHawk paver surface look like?

Freshly sealed paver driveway on a FishHawk property
Sealed paver pool deck on a FishHawk property
Sealed paver patio behind the home on a FishHawk property
Sealed paver walkway to a front door on a FishHawk property
Close view of freshly sealed pavers on a FishHawk property
Paver area with one cleaned half beside a dirty half on a FishHawk property
Contractor cleaning pavers on a FishHawk property
Contractor sealing or sanding pavers on a FishHawk property
How it works

How does the paver cleaning process work?

The paver cleaning process runs in five steps, from a first look to a walk-through. Without sealing, the job stops after the joints are refilled. To get on the schedule, call (656) 269-5576.

1. Inspect and test

The contractor walks the surface and picks a corner to test. Family Handyman tests a spray there first, so any damage shows up where nobody looks.

2. Treat

Algae, mildew and organic stains get a cleaning solution, such as mild detergent or a dedicated paver cleaner. Oil is soaked up first.

3. Wash

A hose, a stiff brush or a low pressure wash with a fan nozzle, held at an angle and kept out of the joints. No wire brush, says Unilock.

4. Dry and refill the joints

Once the pavers have dried, fresh sand is swept into the joints and the extra is brushed off the surface.

5. Walk through

The contractor walks the finished area with you. If you chose sealing, it follows after a full drying period.

Questions

Frequently Asked Questions

How much does it cost to have pavers cleaned and sealed?

A paver company that serves FishHawk lists about $1.75 to $3.00 per square foot for the full clean, sand and seal. A 600 square foot driveway would come to about $1,050 to $1,800. Repairs and old sealer removal are priced on top.

Do I need to clean my pavers before sealing them?

Yes. Unilock says to clean first, because sealer can make any stain left on the surface stand out and traps whatever is under it.

What should I clean pavers with before sealing?

Unilock suggests half a cup of mild detergent in a liter of water, with a stiff broom, a hose or a low pressure wash, and a dedicated paver cleaner for oil and grease. It warns against a wire brush, which leaves metal bits that can rust.

How to pressure clean pavers?

Keep the pressure low and the spray wide. Unilock says to hold a fan nozzle at about a 30 degree angle and 12 inches from the surface. Family Handyman starts with a 40 degree nozzle after a test spray in a corner and says never to spray straight into the joints.

Can I use Dawn dish soap to clean my pavers?

Yes, for light dirt. Family Handyman stirs a little Dawn into a bucket of water, scrubs with a stiff brush and rinses with a hose. Another of its guides uses a tablespoon of liquid dish soap per gallon of warm water.

Can I pressure wash brick pavers?

Yes, with care. Family Handyman shows the method on brick pavers, with a wide nozzle and a test spot first. If the test leaves marks, the pavers are too soft for a pressure washer and should be scrubbed by hand.

Why do my pavers keep turning green in FishHawk?

Shade and damp air. Unilock says mold and mildew are common on pavers that get regular moisture or constant shade, and FishHawk has summer downpours and daily sprinklers to keep surfaces wet.

How often do pavers in FishHawk need cleaning?

Family Handyman recommends washing once a year, ideally in spring. A paver expert it quotes says shaded, wooded spots need a thorough cleaning every year, while sunny spots may only need one every few years.

Will cleaning pull the sand out of my paver joints?

It can. Unilock says improper pressure can blow joint sand out of the crevices, and that new sand should go in if it washes away.

Want green, stained pavers looking clean again?

Describe the worst spots to a local contractor and expect an answer inside 1 business day, frequently much faster.

Call (656) 269-5576

Free, no obligation